[Dev] build error on ath9k-htc-firmware

[Mono]

Hallo Taro,

I didnt look into this for some time. I guess(!) you used what fauno suggested:
> mkdir -p $srcdir/bin
> ln -s /usr/bin/xtensa-unknown-elf-as $srcdir/bin/as
> export PATH=$srcdir/bin:$PATH
I just tried that and also added
ln -s /usr/bin/xtensa-unknown-elf-objcopy $srcdir/bin/objcopy

the result looks exactly what you got. Well, it seems that the correct as (aka xtensa-unknown-elf-as) is used, but still it does not find xtensa-unknown-elf-objcopy. So here is the very ugly alternative approach:

# mv /usr/bin/objcopy /usr/bin/objcopy.away
# ln -s /usr/bin/xtensa-unknown-elf-objcopy /usr/bin/objcopy

then build the package with makepkg
when finished revert the ugly changes

# rm /usr/bin/objcopy
# mv /usr/bin/objcopy.away /usr/bin/objcopy

the same could be done to as and xtensa-unknown-elf-as, or use the approach posted by fauno.

hope it helps
best regards
Mono 


On Sat, Feb 15, 2014 at 07:34:55AM +0000, Taro wrote:
> Hi Mono, 
> your comment is also good help for me
> to build ath9k-htc-firmware.
> However, I got the following error then.
> Can you help again?  best regards.  Taro
> 
> make[2]: Entering directory '/mnt/tmp/taro-tmp/abslibre/libre/ath9k-htc-firmware
> /src/open-ath9k-htc-firmware-1.3.2/target_firmware/build/k2'
> [ 93%] Generating fw.elf
> [ 96%] Generating fw.bin
> /usr/bin/objcopy: Unable to recognise the format of the input file `fw.elf'
> /usr/bin/objcopy: --change-section-vma .text+0xffffffffffc00000 never used
> /usr/bin/objcopy: --change-section-lma .text+0xffffffffffc00000 never used
> CMakeFiles/gen-firmware.dir/build.make:59: recipe for target 'fw.bin' failed
> make[2]: *** [fw.bin] Error 1
> make[2]: Leaving directory '/mnt/tmp/taro-tmp/abslibre/libre/ath9k-htc-firmware/
> 
> 
> _______________________________________________
> Dev mailing list
> Dev at lists.parabolagnulinux.org
> https://lists.parabolagnulinux.org/mailman/listinfo/dev